Namespaces
Variants
Actions

Integral calculus

From Encyclopedia of Mathematics
Jump to: navigation, search

The branch of mathematics in which the notion of an integral, its properties and methods of calculation are studied. Integral calculus is intimately related to differential calculus, and together with it constitutes the foundation of mathematical analysis. The origin of integral calculus goes back to the early period of development of mathematics and it is related to the method of exhaustion developed by the mathematicians of Ancient Greece (cf. Exhaustion, method of). This method arose in the solution of problems on calculating areas of plane figures and surfaces, volumes of solid bodies, and in the solution of certain problems in statistics and hydrodynamics. It is based on the approximation of the objects under consideration by stepped figures or bodies, composed of simplest planar figures or special bodies (rectangles, parallelopipeds, cylinders, etc.). In this sense, the method of exhaustion can be regarded as an early method of integration. The greatest development of the method of exhaustion in the early period was obtained in the works of Eudoxus (4th century B.C.) and especially Archimedes (3rd century B.C.). Its subsequent application and perfection is associated with the names of several scholars of the 15th–17th centuries.

The fundamental concepts and theory of integral and differential calculus, primarily the relationship between differentiation and integration, as well as their application to the solution of applied problems, were developed in the works of P. de Fermat, I. Newton and G. Leibniz at the end of the 17th century. Their investigations were the beginning of an intensive development of mathematical analysis. The works of L. Euler, Jacob and Johann Bernoulli and J.L. Lagrange played an essential role in its creation in the 18th century. In the 19th century, in connection with the appearance of the notion of a limit, integral calculus achieved a logically complete form (in the works of A.L. Cauchy, B. Riemann and others). The development of the theory and methods of integral calculus took place at the end of 19th century and in the 20th century simultaneously with research into measure theory (cf. Measure), which plays an essential role in integral calculus.

By means of integral calculus it became possible to solve by a unified method many theoretical and applied problems, both new ones which earlier had not been amenable to solution, and old ones that had previously required special artificial techniques. The basic notions of integral calculus are two closely related notions of the integral, namely the indefinite and the definite integral.

The indefinite integral of a given real-valued function on an interval on the real axis is defined as the collection of all its primitives on that interval, that is, functions whose derivatives are the given function. The indefinite integral of a function is denoted by . If is some primitive of , then any other primitive of it has the form , where is an arbitrary constant; one therefore writes

The operation of finding an indefinite integral is called integration. Integration is the operation inverse to that of differentiation:

The operation of integration is linear: If on some interval the indefinite integrals

exist, then for any real numbers and , the following integral exists on this interval:

and equals

For indefinite integrals, the formula of integration by parts holds: If two functions and are differentiable on some interval and if the integral exists, then so does the integral , and the following formula holds:

The formula for change of variables holds: If for two functions and defined on certain intervals, the composite function makes sense and the function is differentiable, then the integral

exists and equals (see Integration by substitution)

A function that is continuous on some bounded interval has a primitive on it and hence an indefinite integral exists for it. The problem of actually finding the indefinite integral of a specified function is complicated by the fact that the indefinite integral of an elementary function is not an elementary function, in general. Many classes of functions are known for which it proves possible to express their indefinite integrals in terms of elementary functions. The simplest examples of these are integrals that are obtained from a table of derivatives of the basic elementary functions (see Differential calculus):

1) , ;

2) ;

3) , , ; in particular, ;

4) ;

5) ;

6) ;

7) ;

8) ;

9) ;

10) ;

11) ;

12) ;

13) ;

14) , ;

15) (when is under the square root, it is assumed that ).

If the denominator of the integrand vanishes at some point, then these formulas are valid only for those intervals inside which the denominator does not vanish (see formulas 1, 2, 6, 7, 11, 13, 15).

The indefinite integral of a rational function over any interval on which the denominator does not vanish is a composition of rational functions, arctangents and natural logarithms. Finding the algebraic part of the indefinite integral of a rational function can be achieved by the Ostrogradski method. Integrals of the following types can be reduced by means of substitution and integration by parts to integration of rational functions:

where are rational numbers; integrals of the form

(see Euler substitutions); certain cases of integrals of differential binomials (cf. Differential binomial; Chebyshev theorem on the integration of binomial differentials); integrals of the form

(where are rational functions); the integrals

and many others. In contrast, for example, the integrals

cannot be expressed in terms of elementary functions.

The definite integral

of a function defined on an interval is the limit of integral sums of a specific type (see Cauchy integral; Riemann integral; Lebesgue integral; Kolmogorov integral; Stieltjes integral; etc.). If this limit exists, is said to be Cauchy, Riemann, Lebesgue, etc. integrable.

The geometrical meaning of the integral is tied up with the notion of area: If the function is continuous on the interval , then the value of the integral

is equal to the area of the curvilinear trapezium formed by the graph of the function, that is, the set whose boundary consists of the graph of , the segment and the two segments on the lines and making the figure closed, which may degenerate to points (cf. Fig.).

Figure: i051360a

The calculation of many quantities encountered in practice reduces to the problem of calculating the limit of integral sums; in other words, finding a definite integral; for example, areas of figures and surfaces, volumes of bodies, work done by force, the coordinates of the centre of gravity, the values of the moments of inertia of various bodies, etc.

The definite integral is linear: If two functions and are integrable on an interval , then for any real numbers and the function

is also integrable on this interval and

Integration of a function over an interval has the property of monotonicity: If the function is integrable on the interval and if , then is integrable on as well. The integral is also additive with respect to the intervals over which the integration is carried out: If and the function is integrable on the intervals and , then it is integrable on , and

If and are Riemann integrable, then their product is also Riemann integrable. If on , then

If is integrable on , then the absolute value is also integrable on if , and

By definition one sets

A mean-value theorem holds for integrals. For example, if and are Riemann integrable on an interval , if , , and if does not change sign on , that is, it is either non-negative or non-positive throughout this interval, then there exists a number for which

Under the additional hypothesis that is continuous on , there exists in a point for which

In particular, if , then

Integrals with a variable upper limit.

If a function is Riemann integrable on an interval , then the function defined by

is continuous on this interval. If, in addition, is continuous at a point , then is differentiable at this point and . In other words, at the points of continuity of a function the following formula holds:

Consequently, this formula holds for every Riemann-integrable function on an interval , except perhaps at a set of points having Lebesgue measure zero, since if a function is Riemann integrable on some interval, then its set of points of discontinuity has measure zero. Thus, if the function is continuous on , then the function defined by

is a primitive of on this interval. This theorem shows that the operation of differentiation is inverse to that of taking the definite integral with a variable upper limit, and in this way a relationship is established between definite and indefinite integrals:

The geometric meaning of this relationship is that the problem of finding the tangent to a curve and the calculation of the area of plane figures are inverse operations in the above sense.

The following Newton–Leibniz formula holds for any primitive of an integrable function on an interval :

It shows that the definite integral of a continuous function over some interval is equal to the difference of the values at the end points of this interval of any primitive of it. This formula is sometimes taken as the definition of the definite integral. Then it is proved that the integral introduced in this way is equal to the limit of the corresponding integral sums.

For definite integrals, the formulas for change of variables and integration by parts hold. Suppose, for example, that the function is continuous on the interval and that is continuous together with its derivative on the interval , where is mapped by into : for , so that the composite is meaningful in . Then, for , the following formulas for change of variables holds:

The formula for integration by parts is:

where the functions and have Riemann-integrable derivatives on .

The Newton–Leibniz formula reduces the calculation of an indefinite integral to finding the values of its primitive. Since the problem of finding a primitive is intrinsically a difficult one, other methods of finding definite integrals are of great importance, among which one should mention the method of residues (cf. Residue of an analytic function; Complex integration, method of) and the method of differentiation or integration with respect to the parameter of a parameter-dependent integral. Numerical methods for the approximate computation of integrals have also been developed.

Generalizing the notion of an integral to the case of unbounded functions and to the case of an unbounded interval leads to the notion of the improper integral, which is defined by yet one more limit transition.

The notions of the indefinite and the definite integral carry over to complex-valued functions. The representation of any holomorphic function of a complex variable in the form of a Cauchy integral over a contour played an important role in the development of the theory of analytic functions.

The generalization of the notion of the definite integral of a function of a single variable to the case of a function of several variables leads to the notion of a multiple integral.

For unbounded sets and unbounded functions of several variables, one is led to the notion of the improper integral, as in the one-dimensional case.

The extension of the practical applications of integral calculus necessitated the introduction of the notions of the curvilinear integral, i.e. the integral along a curve, the surface integral, i.e. the integral over a surface, and more generally, the integral over a manifold, which are reducible in some sense to a definite integral (the curvilinear integral reduces to an integral over an interval, the surface integral to an integral over a (plane) region, the integral over an -dimensional manifold to an integral over an -dimensional region). Integrals over manifolds, in particular curvilinear and surface integrals, play an important role in the integral calculus of functions of several variables; by this means a relationship is established between integration over a region and integration over its boundary or, in the general case, over a manifold and its boundary. This relationship is established by the Stokes formula (see also Ostrogradski formula; Green formulas), which is a generalization of the Newton–Leibniz formula to the multi-dimensional case.

Multiple, curvilinear and surface integrals find direct application in mathematical physics, particularly in field theory. Multiple integrals and concepts related to them are widely used in the solution of specific applied problems. The theory of cubature formulas (cf. Cubature formula) has been developed for the numerical calculation of multiple integrals.

The theory and methods of integral calculus of real- or complex-valued functions of a finite number of real or complex variables carry over to more general objects. For example, the theory of integration of functions whose values lie in a normed linear space, functions defined on topological groups, generalized functions, and functions of an infinite number of variables (integrals over trajectories). Finally, a new direction in integral calculus is related to the emergence and development of constructive mathematics.

Integral calculus is applied in many branches of mathematics (in the theory of differential and integral equations, in probability theory and mathematical statistics, in the theory of optimal processes, etc.), and in applications of it. For references see also [1]– to Differential calculus.

References

[1] I.L. Heiberg (ed.) , Archimedes: Opera Omnia , Wissenschaft. Buchgesellschaft , Darmstadt (1972)
[2] W. von Dyk (ed.) M. Caspar (ed.) , J. Keppler: Gesammelte Werke , C.H. Beck (1937)
[3] B. Cavalieri, "Geometria indivisibilibus (continuorum nova quadam ratione promota)" , Bologna (1635)
[4] L. Euler, "Integralrechnung" , Berlin (1770)


Comments

See also Infinitesimal calculus.

References

[a1] G. Valiron, "Théorie des fonctions" , Masson (1948)
[a2] T.M. Apostol, "Calculus" , 1–2 , Blaisdell (1969)
[a3] T.M. Apostol, "Mathematical analysis" , Addison-Wesley (1963)
[a4] W. Rudin, "Real and complex analysis" , McGraw-Hill (1974) pp. 24
[a5] A.C. Zaanen, "Integration" , North-Holland (1967)
[a6] W.M. Priestley, "Calculus: a historical approach" , Springer (1979)
How to Cite This Entry:
Integral calculus. L.D. Kudryavtsev (originator), Encyclopedia of Mathematics. URL: http://www.encyclopediaofmath.org/index.php?title=Integral_calculus&oldid=14758
This text originally appeared in Encyclopedia of Mathematics - ISBN 1402006098